Home

>  CDD

>  forms

>  e-permits

>

Minor Permit Application

Instructions

Requests must be received in this office by 3:00 PM to be processed the following workday. Contractors must have a current certificate of worker's compensation insurance.

Do not start work until after receiving the completed building permit. Work started before a building permit is issued will be subject to a quad fee, which is four times the original permit fee. Having a faxed permit application that is in process will not exempt you from these penalty fees.

Picking up the permit

If the applicant has pre-registered, the permit will be emailed to the given email address. If not, the permit must be picked up at the Permit Counter.

Extra Requirements

Permits requiring a plan review are not eligible for this program.

Design Review and Historic Preservation approval may be required if job address is located in those areas. (Check the property address to see whether it is within such an area.)

Job Information

In order to process this request, the information in this section must be provided:

Building Type *	Residential Commercial Apartments
Job Address *
City / State / Zip *
Unit #
Contract Price ($) *
Nature of Work *

Contractor If the property owner is the one doing the work, please enter "Owner-Builder" in the License field. A signed copy of the Owner-Builder Verification Form must also be submitted when the permit is picked up at the Permit Counter, unless applicant is already pre-registered.
Name *
License *
Pre-registered? *	Yes No
Registration # (if yes)
Address *
City / State / Zip *
Phone *
Fax
Email *
Property Owner
Name *
Address *
City / State / Zip *
Phone *

Requested Permits

Directions

Please first check the black box of the permit you wish to apply for. Then fill in the details underneath.

Reroof

Tear-Off Resheet	House Garage	# of Squares   # of Stories
Material

Roofing Type After completion, the roof must have a pitch of 2:12 or less. Please check all that apply. Existing Proposed   30-year laminated dimensional composition Wood shake or shingle Tile Metal that simulates one of the above listed materials Built up Foam Membrane Design Review Guide for Roofing, Gutters and Rafter Tails Gutters & Rafter Tails Existing Proposed   Fascia gutters Ogee gutters No gutters No Rafter Tails

Siding

Wood

T-111

Horiz

Vinyl

Stucco

HVAC Installations (Residential Only)

Change-out New Value of Duct Work Equipment ($) Cut-In ($)

Heat Pump Package Split System Roof Mount Cut-In Heat Pump/Electric to Gas Wall Furnace Other (Describe below)

Existing Proposed   Ground-Mounted Unit Roof-Mounted Unit No Unit Unit Location Unit will remain in same location The new unit must not exceed the size of the existing unit by 25%. New unit location differs from existing unit Screening When the project is complete, the unit will be completely screened from all street views, with no portion of the unit visible, by one or more of the following:   The building itself Fencing Shrubs

Water Heater (Residential Only)

Electric Gas

Change-out New Relocate Electric to Gas

Dry Rot or Termite Damage Repair

Flooring/Joists Mudsill/Studs

Roof Structure Exterior

Minor Electric and/or Minor Plumbing (Residential Only)

Electric Service Change # of amps New Electric Circuits Re-wire

Water Service Replacement Sewer Service Replacement Gas Line Replacement Replumb Water Waste

Public Utilities Safety Inspection (Residential & single apt. units only)

SMUD

PG&E